Pan Idler Conveyor

Available Widths:

  • 18" (457.2mm)
  • 24" (609.6mm)
  • 30" (762mm)
  • 36" (914.4mm)

Belt Speeds FPM: 190 - 590 (0.97 - 3 m/s)

Head Pulley: 12-1/2" (317.5mm) Dia. w/ Vulcanized Rubber Lagging

Tail Pulley: 10" (254mm) Dia. Self-Cleaning Wing Pulley

Idlers: 1.9" (48.3mm) Dia. Rollers with ABEC-1 Precision Bearings

Trough Construction: 12 Ga. Formed

Construction: Powder Coated Carbon or Stainless Steel Available

Optional Accessories:

  • Discharge Housing: Captures material at the head of the conveyor and directs it to a square flange so that it can be easily transitioned to the next process
  • Weather Covers: Top and bottom covers are available to keep material in and the worst of the elements out
  • Inlet Hopper: Square flanged inlet for easy feeding of the conveyor
  • Belt Scraper: Can be used to scrape sticky material from the belt at the head before being carried back
  • Install Mounting Brackets: Create easily accessible mounting holes to brace the unit so that it can be simply bolted to supports
  • Hinged Bottom Covers: Gives the option of letting the bottom cover swing open instead of dropping the whole cover for clean out
  • Center Drive: Can be used when conveyors are needing to be reversed on occasion, also used for longer units to give extra take-up so that belts do not need to be re-laced as they stretch
  • Extended Take-up: Used on longer units to give extra take-up so that belts do not need to be re-laced as they stretch

Ability to be Totally Enclosed

Easily Accessible Inspection Doors in the Discharge and Tail

 

Designed with Safety in Mind, All Rotating Components Come Guarded as a Standard

For more information, download our literature page here or contact us!