UTT
Series
Curved
bottom boot design reduces material build-up in the boot, requiring less
maintenance.
There's
no better solution to handling shake-out sand, steel shot, deburring
media (fine or coarse) and highly abrasive material. Better sealing, replaceable
UHMW boot liners and low inlet height make the big difference! Try just
one; you'll never settle for any other elevator for such applications.
Exclusive "EASY DUMPTM" Design
(U2TT-800ED only)
Specifications
*Because
we constantly strive to provide the finest material handling
equipment, establishing industry standards, specifications must remain
subject to change without notice.*
| Model |
U2-800ED
|
U2-1500
|
U2-2000
|
| Capacity
- Free Flowing Material @ 85% Bucket Fill |
800
ft3/h
22
m3/h
|
1500
ft3/h
42
m3/h
|
2000
ft3/h
56
m3/h
|
| Short
tph@ 50 lbs. cu. ft. |
20
tph |
37
tph |
50
tph |
| Short
tph@ 75 lbs. cu. ft. |
30
tph |
56
tph |
75
tph |
| Belt
Speed |
168
fpm |
316
fpm |
421
fpm |
| Headshaft
rpm |
77
rpm |
146
rpm |
195
rpm |
| Bucket
Spacing |
5" |
5" |
5" |
| Head
Casing |
14
ga. side with 11 ga. rim |
| Headshaft
Diameter |
1-11/16"
(standard); 1-15/16" (optional) |
| Headshaft
Bearing |
Ball
bearing pillow block; roller (optional) |
| Head
Pulley |
8-3/8"
Diameter crown face with vulcanized rubber lagging |
| Buckets |
7"
x 4-1/2" plastic or 16 gauge steel |
| Belting |
8"
wide PVC; rubber (optional) |
| Legging |
14
gauge single leg with corner angles |
| Boot
Casing |
10
gauge |
| Bootshaft |
1-3/16"
Diameter |
| Bootshaft
Bearing |
Ball
bearing take-up unit |
| Boot
Pulley |
Slatted
self cleaning style |
| Construction |
Carbon
or 304 stainless steel |
| Drive
Package |
Optional |
| Motor |
Optional |
