 |
M Series
M
Bucket
Elevators up to 30,000 ft3/h
(850 m3/h) 25,000 bph
Exclusive
"EASY DUMPTM"
Design (M-10ED only)
Specifications
*Because
we constantly strive to provide the finest material handling equipment,
establishing industry standards, specifications must remain subject to change
without notice.*
| Model |
M10-ED |
M-15 |
M-20 |
M-25 |
| Capacity
- Free Flowing Material @ 78% Bucket Fill |
10,000
bph 12,445 ft3/h 353 m3/h |
15,000
bph 18,668 ft3/h 529 m3/h |
20,000
bph 24,000 ft3/h 680 m3/h |
25,000
bph 30,000 ft3/h 850m3/h |
| Short
tph@ 50lb/ft3 (801kg/m3) |
312 |
467 |
600 |
750 |
| Short
tph@ 75lb/ft3 (1,201kg/m3) |
468 |
700 |
900 |
1,124 |
| Belt
Speed-fpm (mpm) |
290
(88.4) |
400
(121.9) |
540
(164.6) |
680
(207.3) |
| Headshaft
rpm |
30 |
45 |
55 |
70 |
| Bucket
Spacing |
11"
(27.9cm) Staggered
|
| Head
Casing |
12
ga side with 10 ga rim |
| Headshaft
Diameter |
Based
on application |
| Headshaft
Bearing |
Roller
bearing
pillow block |
| Head
Pulley |
36"
(91.4 cm) dia. x 40" (101.6cm)wide, vulcanized rubber
lagging, HD double hub |
| Buckets |
18"
x 8" (45.7 x 20.3cm) |
| Belting |
38"
(96.5cm) wide PVC,
woven polyester |
| Boot
Casing |
3/16"
(48mm) plate w/ heavy corner angles |
| Legging |
12
ga twin column |
| Bootshaft |
2-7/16"
(6.2cm) |
| Bootshaft
Bearings |
Wide
slot take-up ball bearings |
| Boot
Pulley |
36"
(91.4cm) dia. x 38" (96.5cm) wide steel |
| Construction |
Carbon
Steel |
| Drive
Package |
Optional |
| Motor |
Optional |
|
|
